FN- BC20 is a high quality MP3 sound board, equipped with an on-board 2x 15 W class D amplifier, the sound board can be controlled by 20 separate buttons hooked up to the ‘one-on-one’ inputs terminals, R232 serial port and RS485 serial port. Great audio output, industry-grade design and strong anti-jamming capability make it possible to be used for many different applications.
Built-in a high quality 24bit of audio decoder with stereo audio output.
Supports to play audio files of MP3 and WAV formats.
On-board a high quality 2x15 Watt class D amplifier to directly connect with two 8 ohm speakers of 15Watts or more, for left channel and right channel.
Uses SD card or USB flash drive for sound file storage devices.
Supports maximum 32GB SD card or 32GB USB flash drive. (1GB SD Card included)
Supports button control mode, RS232 and RS485 serial control mode.
In button control mode, playback of the ‘one-on-one' associated audio files are triggered by negative pulse to any of the 20 input terminals.
In button control mode, possible playback of 255 MP3/WAV audio files per 20 ‘one-on-one’ associated folders through negative trigger.
In button control mode, Four Selectable triggering modes are provided.
Supports audio output to an external amplifier through the RCA audio jacks.
Separate volume control for each sound channel (only for on-board amplifier).
On-board relay used to control on/off to external equipment during playback.
Wide range for power input DC (12V - 24V).
Industry-grade design and strong anti-jamming capability.
PCB size: 135mm x 75 mm (5.315 Inches x 2.953 inches).
Power input: DC12-24V
Rated output: 15W×2 (RL= 8Ω d=1%)
Noise Voltage: ≤50mV
Frequency response: 20-20KHz
K1 through K20 are representing Normally Open (N.O.) manual buttons. Please refer to the connection example below.