Modbus TCP Weather Station Gateway

199.00 199.00 199.0 USD

Add to Cart

SKU : KTA-282
Quantity on Hand : 1
Skill Level : Assembled and Tested

Buy 10, Get 5% Off!
Buy 100, Get 10% Off!

Description: The KTA-282 Modbus TCP Weather Station Gateway is a major upgrade to the GWY-141 serial modbus gateway, adding Modbus TCP/IP support.

The gateway plugs into the weather station's console using the Davis WeatherLink cable (Weather Link for Vantage Pro Serial) and appears on the Modbus network as a Modbus TCP/IP or RTU slave. This allows your programmable controller to monitor and carry out actions based on wind speed, wind direction, temperature, etc.


  • New! Two Open Collector outputs for alarms or control
  • Connects to a Modbus TCP/IP network via Ethernet. Can be polled by up to three Modbus masters simultaneously
  • Provides a webpage whereby TCP/IP settings can be easily configured. Also shows current settings, weather data, and communications statuses
  • Also supports Modbus RTU over RS-485.
  • Supports the new LOOP 2 command. This provides an additional 16 packets of previously unavailable weather data.
  • Can directly write the internal memory of the weather station, allowing configuration values to be changed (commonly latitude, longitude, elevation, timezone, etc)
  • Allows interrogation over HTTP to return any Modbus register values in XML format. Make your own custom application using the weather data
  • The unit can be screwed to a panel, or mounted to DIN rail.

Dimensions: 115 × 90 × 40 mm

Documentation and Downloads: